電話：86-020-82109722
E-mail：sales@confon.com.cnACYBOND? 3300LT
新一代高綜合性能水性丙烯酸樹脂
---- 專為高性能的透明底面漆設計的高性價比水性樹脂
ACYBOND? 3300LT 丙烯酸聚合乳液在水性木器漆及水性工業漆領域應用廣泛，性能穩定優異，采用核殼結構的乳液自交聯技術，其核硬殼軟的結構設計（核的玻璃化溫度大于50℃，殼的玻璃化溫度小于0℃）從而形成高硬度、高抗粘，優秀的打磨性能的特性。在核殼合成過程中，采用包括加成有機硅在內的雙重交聯技術，使樹脂在硬度、耐水性、附著力、光澤等方面得到更大提高，硬度與水性聚氨酯相仿，漆膜具有優秀的清透性。
ACYBOND? 3300LT 的特點：
干燥速度快，漆膜在常溫下表干快，硬度上升快，打磨性能上升快；
環保無毒，不含APEO，不含甲醛；
優秀的漆膜透明度；
優異的光澤，可以設計高光配方；
抗粘連性好；
優秀的附著力；
用于松木耐黃變性能好；
防漲莖性能好；
典型物理性質:
外觀 | 乳白色清透液體 |
固含量, % | 42% |
pH | 7.0 – 9.0 |
Brookfield 粘度, LVF, #1轉子, 60 轉/分鐘, 25o C, CPs | 50-400 |
密度 | 1.03g/ml |
*低成膜溫度 | 32oC |
儲存事項 | 防止結凍 |
ACYBOND? 3300LT
New Generation Acrylic Co-polymerr
---- Special design for high performance and low price waterborne wood coatings
ACYBOND? 3300LT emulsion was designed for use in factory-applied, waterborne interior wood coatings. It offers good early sandability, block resistance and stain resistance, as well as extremely low microfoam entrapment. It was designed for Core-shell emulsion (core hard Tg > 50 oC and soft shell Tg < 0 oC) and self-crosslinking technical. It offers excellent surface hard as well as good low temperature film grow up. It has water resistance, good adhesion to substrate was used in water base wood coating.
ACYBOND? 3300LT characteristic：
Quick hardness development;
Outstanding membrane clear clarity；
Dry fast, Excellent preliminary stage sanding;
Excellent preliminary stage Anti-stick under board to board;
APEO free and no added formaldehyde or formaldehyde generators;
Good application properties;
Good gloss potential;
Special physical data:
Appearance | White clear liquid |
Solid, % | 42% |
pH | 7.0 – 9.0 |
Brookfield , LVF, #1, 60 R/M, 25o C, CPs | 50-400 |
Density | 1.03 g/ml |
MFFT | 32oC |
Storage precautions | Protect from freezing |
物料安全技術手冊
1. 物料與廠商資料
物品名稱：水性丙烯酸乳液
物品牌號：ACYBOND 3300LT
供應商資料：廣州市祥楓化工科技有限公司/中國廣州市天河區東圃鎮東圃商業大廈D座3A17室/聯系電話：86-020-62861313/傳真：86-020-62861326/電郵：SAILORZENG@ALIYUN.COM/聯系人：曾杰
2.成分資料
所屬化學類別：水性丙烯酸聚合物
分子形態：高分子聚合物
組份： 1）丙烯酸共聚物：42% ，化學物質登記號碼（CAS NO）: 25085-34-1；
2）水： 58%, 化學物質登記號碼（CAS NO）: 7732-18-5
3.危害辨識資料
允許接觸限度：無相應限制。該產品不是危險品。
物品危害分類：第9類
4.急救措施
1）皮膚接觸：盡快脫去被污染的衣物，鞋子，用水反復清洗，沖洗后還有刺激，立即就醫。
2）眼睛接觸：立即將眼皮撐開，用水反復緩和沖洗至少10分鐘，不要讓含有污染物的沖洗水流入未受污染的眼睛里，沖洗后還有刺激感，立即就醫。
3）吸入:出去污染源將患者移到空氣新鮮處，多休息，如呼吸困難，由受過訓練的人供給氧氣，如果還有癥狀立即就醫。
4）食入：清洗嘴巴，立即就醫
5.滅火措施
不是易燃物品，萬一陷入火中，可能釋放有毒害或有刺激性氣味的氣體。
適用滅火器：泡沫，干粉，二氧化碳，水槍
禁止使用何種滅火器：沒有
特別暴露危害：萬一發生火災或者爆炸，不要呼吸所釋放的氣體
保護裝備：火災中該產品能夠釋放有毒害的氣體，穿戴呼吸保護裝備
特殊防備：用水冷卻未泄露的包裝，防止包裝壓力增加
6.泄露處理
個人注意事項：預防接觸眼睛和皮膚
環境注意事項：圍堵泄露物不要擴散，用干砂土吸收，保持環境通風，避免泄露物進入下水道和密閉的空間
清理方法：用沙，土和任何可以吸收的物料進行吸收，再包裝掩埋。
7.安全處置和儲存方法
處置預防：避免在不通風的環境下開通；避免物料的揮發濃縮；避免吸入揮發氣體；避免眼睛和皮膚接觸
儲存預防：遠離高溫和霜凍，儲存在5-40度陰涼，干燥，通風良好及陽光無法直射的地方。
8.暴露預防措施
暴露控制：避免接觸皮膚和眼睛，避免吸入揮發物，在通風處使用
個人防護保護：佩戴呼吸口罩，特別在噴涂中使用
手部保護：安全手套
眼睛保護：安全眼鏡
皮膚保護：安全著裝
9.物理及化學性質
外觀：乳白色液體
揮發率 (重量百分比)：58% (水)/粘度：50-400CPS /揮發速度：(WATER=1) 1 /pH ：7.0-9.0
水溶性：100% 可溶 /密度：1.03
可燃性數據：該產品不可燃；閃點： 不適用；爆炸上限：不適用；爆炸下限：不適用；自燃溫度：不適用
滅火介質：液態物質不可燃。 成膜干燥后可燃燒。可使用任何滅火介質來撲滅該物質引起的火災。
滅火注意事項：無特別要求
10.安定性及反應性
安定性：正常狀況下安定，不發生反應，水汽揮發完會成膜或粉
預防避免的狀況：沒有
預防避免的物料：沒有
危害分解物：沒有
11.毒性資料
吸入物：引起呼吸系統刺激
皮膚：對皮膚有刺激
眼睛：對眼睛有刺激
食入：對胃腸有危害
長時間暴露：無
12.生態資料
可能的環境影響：如果沒有化學成膜，不要釋放到環境中，成膜物對環境沒有危害
其他相關數據：-風險評估，對水有輕微的危害: (VwVwS 4.3; 17.05.1999)
13.廢棄處置辦法
參照當?shù)氐姆煞ㄒ?guī)處理
14.運輸資料
非危險品，不受條例管制
15.調整資料
適用法規：勞動者安全與衛生；危險品管理與儲存守則；危險品運輸；廢棄物儲存清除處理方法及設施標準
產品分級：無
危險劃分：無
安全劃分：無
無EC的*：無
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPERATION AND THE COMPANY
VERSION DATE: 2015-4-4
Product Name : ACYBOND 3300LT
Chemical Name: Acrylic co-polymer
Company Information:Guangzhou CONFON Chemical Tec. Co., Ltd. Emergency:
Room3A17,Dongpu Business Plaza , Tel:020-62861313
Tianhe , Guangzhou, P.R.C. Fax:020-62861326
SAILORZENG@ALIYUN.COM
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Characterization: Waterborne copolymer CAS No. : -
Conc. wt% Casnr. Hazard Symbols R-phrases
Conc. wt% CAS NO
42% acrylic copolymer 25085-34-1
58% Water 7732-18-5
3. HAZARDS IDENTIFICATION
This health hazard assessment is based on a consideration of the composition of this product.
May cause eye irritation.
4. FIRST AID MEASURES
Skin Contact: Remove contaminated clothing. Wash skin with water. If symptoms develop, obtain medical attention.
Eye Contact: Irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 10 minutes. Obtain medical attention if ill effects occur.
Inhalation: Remove the patient from exposure, keep warm and at rest. Obtain medical attention if ill effects occur.
Ingestion: Wash out mouth with water. Obtain medical attention if ill
effects occur.
Further medical treatment: Symptomatic treatment and supportive therapy as indicated.
5. FIRE-FIGHTING MEASURES
Not classed as flammable. If involved in a fire, it may emit noxious and toxic fumes.
Extinguish media: Foam, CO2, dry powder, water spray.
Don't use: -
Special exposure hazards: In case of fire and/or explosion do not breathe fumes.
Protective equipment: Product may give off toxic fumes in fire: wear breathing apparatus
Special precautions: Water may be used to cool closed containers to prevent pressure build-up.
6. ACCIDENTAL RELEASE MEASUREMENT
Personal precautions: Avoid contact with skin and eyes.
Environmental precautions: Do not release to the environment.
Methods for cleaning up: Absorb spillages in sand, earth or any suitable absorbent material. Transfer to a container for disposal.
7. HANDLING AND STORAGE
Handling precautions Avoid opening drums in unventilated areas to avoid
concentrated vapours. Avoid breathing vapours. Avoid contact with skin and eyes.
Storage conditions Keep away from frost.
Store between 5°C and 40°C.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure controls: Avoid contact with skin and eyes. Do not breathe vapour/spray. Use only in well ventilated areas. Do not take internally.
Personal protection equipment
Respirators protection yes, (in spray mists)
Hands protection gloves
Eyes protection safety glasses.
Skin protection safety wear.
9. PHYSICAL AND CHEMICAL PROPERTIES
Type waterborne acrylic copolymer
Appearance white liquid
Odor Mild
pH 7.0 – 9.0
Boiling point ± 100 oC
Total solids (%w/w) 42 ± 1 %
Viscosity Brookfield (25oC) 50-400 mPas
Density (20 oC; kg/l) 1.03
Solubility in water (% by wt.) Miscible.
Vapor pressure (at 20℃) 23 mbar as water
Flashing point Not applicable
Explosion Limited Not applicable
Oxidizing properties Not applicable
Flammability Not applicable
Softening point Not applicable
Melting point Not applicable
10. STABILITY AND REACTIVITY
Stability The material will not support combustion unless the water has evaportaed
Conditions to avoid None known
Material to avoid None known
Hazardous decomposition products None known
11. TOXICOLOGICAL INFORMATION
Inhalation: May be irritating to respiratory system
Skin: May cause skin irritation
Eyes: May cause eye irritation
Ingestion: May be harmful if swallowed
Long time exposure No information available
12. ECOLOGICAL INFORMATION
Ecotoxicity Do not release to the environment without chemical
precipitation/flocculation. The precipitate is not hazardous.
Other relating data: -
WGK: 1: slightly hazardous to water (VwVwS 4.3; 17.05.1999)
13. DISPOSAL CONSIDERATIONS
Dispose in accordance with local and state regulations.
14. TRANSPORT INFORMATION
Not classified as hazardous for transport
DOT classification no regulation
IATA/ICAO classification -
Packing Group -
UN number -
“Marine pollutant” no
"Proper shipping name" NOT RESTRICTED
Additional information -
15. REGULATORY INFORMATION
Classification NOT CLASSIFIED AS HAZARDOUS TO USERS
Risk Phrases -
Safety Phrases -
Non EC Countries -
The information contained in this safety data sheet is the result of the most up-to-data available in our company. The information given in this data sheet does not constitute or replace the user’s own assessment of workplace risk as required by other health and safety legislation. The user must ensure that the information is suitable and complete in relation to the specific use of the product
Acybond 3300LT推薦配方
水性透明底漆
原材料 | 百分比 | 功能 | 供應商 | 操作步驟 |
1).ACYBOND? 3300LT | 80.00 | 基料 | CONFON | 1. 稱量加入(1)開動攪拌,中速; 2. 預先混合(2)-(7), 在高剪切速度下,細流緩慢加入,分散10分鐘 3. 加入(8)-(9)分散30分鐘 4. 目標黏度:60KU |
2).WET 270 | 0.20 | 潤濕流平劑 | 迪高 | |
3).FOAMEX 810 | 0.30 | 消泡劑 | 迪高 | |
4).DPM | 2.0 | 成膜助劑 | DOW | |
5).DPnB | 3.0 | 成膜助劑 | DOW | |
6).BYK-191 | 0.1 | 分散劑 | BYK | |
7).水 | 13.1 | 消泡劑 | BYK | |
8).打磨助劑 | 1.0-2.0 | - | - | |
9).滑石粉 3000# | 2.0-5.0 | - | - | |
10).氨水 | 0.4 | 中和 | - | |
11).ACRYSOL RM-2020NPR | 適量 | 流變改性劑 | DOW | |
12).PUR 40 | 適量 | 增稠劑 | 明凌 | |
總計 | 110.00 |
水性透明面漆
原材料 | 百分比 | 功能 | 供應商 | 操作步驟 |
1).ACYBOND? 3300LT | 80.00 | 基料 | CONFON | 1. 稱量加入(1)-(5)開動攪拌,中速; 2. 預先混合(6)-(11), 在高剪切速度下,細流緩慢加入,分散10分鐘 3. 加入(12)-(14),分散10分鐘 4. 目標黏度:60KU 5. 光澤: 35-37 |
2).BYK-191 | 0.20 | 分散劑 | BYK | |
3).902W | 0.10 | 消泡劑 | 迪高 | |
4).ACRYSOL RM-2020NPR | 1.0 | 流變改性劑 | DOW | |
5).TS-100 | 1.6 | 啞粉 | - | |
6).DPNB | 3.0 | 成膜助劑 | DOW | |
7).DPM | 2.0 | 成膜助劑 | DOW | |
8).FOAMEX 810 | 0.3 | 消泡劑 | 迪高 | |
9). WET 270 | 0.2 | 潤濕流平劑 | 迪高 | |
10). BYK-346 | 0.2 | 潤濕流平劑 | BYK | |
11).水 | 15.0 | - | - | |
12).氨水 | 0.5 | 中和 | - | |
13).WAXPOLY WF5090 | 3.0 | 蠟乳液 | CONFON | |
14).ACRYSOL RM-2020NPR | 適量 | 流變改性劑 | DOW | |
總計 | 110.00 |
 |
 |
 |
 |
 |
